Portable Tripod

So, I have been looking for something interesting to post and I have found it. I don't know if it works but I will be trying it sometime since it will cost practically nothing!

DIY: The Super-Small Bottle-Cap Tripod

Wed, 2007-01-17 21:16 — udijw
When you are going on a field trip, you want your tripod to be small. Small and light. It would be best if it can fit in your pocket. When Ron Uriel saw the post about the wrap-able tripod, he had an idea. Why not use the 1/4" bolts in other ways. He told me about an idea to make a small tripod from a coke bottle.
This sounded like an interesting idea so I got to work. First I got several coke bottles (you can learn allot about a person by the bottle caps he uses. In my case, the gray-silver cap suggests I drink the diet version of the bubbly beverage). I also needed a 1/4" hex bolt, a 1/4" hex nut, and two of those round thingies called washers. For the finishing touch I used some sand paper. (If you are not into coke or diet coke you can use the beverage to perform the Mentose and Diet Coke experiment - just make sure you retrieve the bottle)

The first thing I did was to drill a hole in the middle of the bottle cap (note - after this step you can no longer use the cap to seal the bottle :) I drilled using a small drill to mark the middle and enlarged the hole using a 1/4" drill. See the picture for the drilled caps. You can use the sandpaper to even up the top of the cap (not a must). You can also see how the diet cap ended up smoother then the regular one.

Now you make cap sandwich: you take the bold and you slide one washer in; then you screw the bottle cap onto the bolt and slide another washer.

Lastly you tighten the nut on the outer side of the cap. Make sure you tighten the nut pretty well, other wise, you will have trouble removing the camera from the tripod.

This is it. Very easy.
The next step is to find a coke bottle. Fill the bottle with water or sand to make it heavy and stable. Now place the bolted cap on bottle and plug your camera in.
Now a word of caution here: this tripod will work great for point and shoots like canon A620 or A75, I would not try my D70 with SB800 and 100-400 lens mounted on this fixture.

www.diyphotography.net/the-super-small-bottle-cap-tripod

~Ellentia